|Weight Stack||Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.
|Upholstery||Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.|
|Adjustable Seat||Yes, gas-assisted ratcheting seat adjustment|
|Adjustments||Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.|
|Instructional Placard||Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.|
|Bearings and Pivot Points||Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.|
|Water Bottle and Accessories Holder||The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.|
|Pulleys and Cables||Glass-fiber-reinforced nylon pulleys provide strength and durability, while precision ball bearings allow effortless rotation. Cables use a 7×19 stranded wire configuration for added strength and flexibility and are coated with black pressure-extruded nylon for long lasting protection and a smooth feel. 3/16-inch (.48 cm) wire is coated to 1/4 inch (.64 cm) with a breaking strength of 4200 lb (1905 kg) and 1/8 inch (.32 cm) wire is coated to 3/16 inch (.48 cm) with a breaking strength of 2000 lb (907 kg).|
|Frame and Finish||The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat.|
|Bolt Down Capability||Yes|
|General Features||Knee pad moves with user’s lower legs; thigh hold-down pad included. Start position and roller pads adjust for optimal exercise mechanics.|
|Standard Shroud Color||Black|
|Incremental Add-on Weight||5 lb (2.3 kg)|
|Weight Stack||240 lb / 109 kg|
|Workout Area (L x W)||66 L x 50 W inches / 168 L x 127 W cm|
|Standard Frame Colors||Black Pearl; Gloss Metallic Silver|
|Stocked Upholstery Colors||All Spice, Black, Grey|
|Additional Upholstery Options (Additional lead time applies)||American Beauty, Blue Jay, Burgundy, Deep Clay, Hunter Green, Navy, New Purple, Regal Blue, Slate|
Equipment Dimensions and Weight
|Length||63 inches / 161 cm|
|Width||48 inches / 121 cm|
|Height||58 inches / 148 cm|
|Equipment Weight||609 lb / 277 kg|